Ms Pipe

MS Pipe Weight Chart 2026: Complete Guide with Formula and Calculator

An accurate MS Pipe Weight Chart helps contractors, engineers, fabricators and steel buyers estimate material requirements before purchasing steel pipes. Whether you are working on construction, infrastructure or industrial fabrication, understanding pipe weight is useful for cost estimation, transportation and project planning.

This guide provides theoretical mild steel pipe weights in kg per meter, common pipe sizes, wall thickness comparisons and simple calculation examples. You can also use the pipe weight formula to estimate the total weight of a single pipe or an entire order.

Hi-Tech Pipes Limited manufactures MS round pipes and structural steel tubes for construction, infrastructure and industrial applications across India.

Quick Answer: How to Calculate MS Pipe Weight?

The theoretical weight of a round mild steel pipe is calculated using the following formula:

Weight (kg/m) = 0.02466 × T × (D − T)

Where:

  • D: Outside diameter in millimeters
  • T: Wall thickness in millimeters
  • 0.02466: Approximate constant for steel density of 7,850 kg/m³

For example, a pipe with a 60.3 mm outside diameter and 3.2 mm wall thickness weighs approximately 4.51 kg/m. A 6-meter length weighs about 27.04 kg.

What Is an MS Pipe?

MS stands for Mild Steel. MS pipes are manufactured from low-carbon steel and are used in structural, mechanical and selected fluid transportation applications.

Many mild steel pipes are produced using the Electric Resistance Welding (ERW) process. Steel strips are formed into circular tubes, and their edges are welded together using electrical resistance heating and pressure.

After welding, the tubes undergo sizing, straightening, cutting and quality inspection.

Common Applications of MS Pipes

  • Building construction and structural frameworks
  • Industrial sheds and warehouses
  • Scaffolding and structural supports
  • Railings and fencing
  • Water transportation systems
  • Agricultural structures
  • Machinery and equipment fabrication
  • General engineering

MS Pipe Weight Chart in KG Per Meter

The following reference table shows approximate theoretical weights for common MS round pipe outside diameters and wall thicknesses.

All values are expressed in kilograms per meter (kg/m).

Outside Diameter (mm) 2.0 mm 2.6 mm 3.2 mm 4.0 mm 5.0 mm 6.0 mm
21.30.951.201.431.71——
26.91.231.561.872.26——
33.71.561.992.412.933.54—
42.41.992.553.093.794.61—
48.32.282.933.564.375.34—
60.32.883.704.515.556.828.03
76.13.654.715.757.118.7710.37
88.94.295.536.768.3810.3512.27
114.35.547.168.7710.8813.4816.03
139.76.798.7910.7713.3916.6119.78
168.38.2010.6213.0316.2120.1424.02
219.110.7113.8817.0421.2226.4031.53

Note: These values are theoretical and based on a nominal steel density of 7,850 kg/m³. Actual weights may vary because of dimensional tolerances, steel composition and coatings. A dash indicates that the combination is not included in this reference table and does not represent product availability.

MS Pipe Weight Chart for 6-Meter Lengths

Six-meter pipe lengths are commonly used for steel quantity estimation. The following table shows the approximate total weight of selected round pipes.

Outside Diameter (mm) Wall Thickness (mm) Weight per Meter (kg) Weight for 6 Meters (kg)
21.32.00.955.71
26.92.01.237.37
33.72.61.9911.95
42.42.62.5515.31
48.33.23.5621.36
60.33.24.5127.04
76.13.25.7534.52
88.94.08.3850.25
114.34.010.8865.28
168.35.020.14120.85

MS Pipe Weight Formula Explained

The theoretical weight of a round steel pipe depends on the cross-sectional area of steel and the material density.

The exact geometric formula is:

Weight (kg/m) = π × 0.00785 × T × (D − T)

Using a rounded constant, the commonly used formula becomes:

Weight (kg/m) ≈ 0.02466 × T × (D − T)

This formula applies to hollow circular steel pipes with uniform wall thickness.

Example 1: Weight of a 2-Inch MS Pipe

Consider a round pipe with the following dimensions:

  • Nominal size: 2 inches
  • Outside diameter: 60.3 mm
  • Wall thickness: 3.2 mm
  • Length: 6 meters

Step 1: Calculate weight per meter

Weight = 0.02466 × 3.2 × (60.3 − 3.2)

Weight ≈ 4.51 kg/m

Step 2: Calculate weight for 6 meters

Total weight = Weight per meter × Length

Total weight ≈ 27.04 kg

Example 2: Weight of a 4-Inch MS Pipe

Consider a pipe with an outside diameter of 114.3 mm, wall thickness of 4.0 mm and length of 6 meters.

Weight = 0.02466 × 4 × (114.3 − 4)

Weight ≈ 10.88 kg/m

Total weight ≈ 65.28 kg

Free MS Pipe Weight Calculator

Use the calculator below to estimate the theoretical weight of round mild steel pipes. Enter the outside diameter, wall thickness, pipe length and quantity.

The calculation assumes a nominal steel density of 7,850 kg/m³ and excludes coating weight.

How to Calculate MS Pipe Weight Per Foot

Some construction and fabrication projects use feet instead of meters. To convert pipe weight from kg/m to kg/ft, divide by 3.28084.

Weight (kg/ft) = Weight (kg/m) ÷ 3.28084

For example, a pipe weighing 4.51 kg/m weighs approximately 1.37 kg/ft.

Common MS Pipe Sizes in MM and Inches

MS pipes are identified by nominal bore, nominal pipe size or outside diameter. These measurements are not interchangeable.

Nominal Bore (mm) Nominal Size (Inch) Typical Outside Diameter (mm)
15½21.3
20¾26.9
25133.7
321¼42.4
401½48.3
50260.3
652½76.1
80388.9
1004114.3
1255139.7
1506168.3
2008219.1

These are common dimensional references. Always confirm the outside diameter against the relevant product standard and purchase specification.

6 Factors Affecting Mild Steel Pipe Weight

1. Outside Diameter

A larger outside diameter generally increases pipe weight when wall thickness remains unchanged.

2. Wall Thickness

Increasing wall thickness increases the quantity of steel in the pipe. For example, a 60.3 mm OD pipe with a 2.0 mm wall weighs approximately 2.88 kg/m, while a 4.0 mm wall increases its theoretical weight to approximately 5.55 kg/m.

3. Pipe Length

Longer pipes contain more material. A 12-meter pipe weighs approximately twice as much as a 6-meter pipe with identical dimensions.

4. Steel Density

The theoretical formula assumes a steel density of approximately 7,850 kg/m³. Actual density can vary slightly with steel composition.

5. Manufacturing Tolerances

Actual pipe dimensions may vary within permitted manufacturing tolerances, which can affect weight.

6. Surface Coating

Galvanized and other coated pipes may weigh more because of the additional protective material.

MS Round Pipe vs MS Hollow Section Weight

Round pipes and structural hollow sections have different cross-sectional geometries.

MS round pipes have circular profiles, while Square Hollow Sections (SHS) and Rectangular Hollow Sections (RHS) have square and rectangular profiles.

For structural hollow sections, weight calculations should account for outside dimensions, wall thickness and corner radii.

Refer to the manufacturer's section tables for accurate theoretical weights.

Learn more about MS Hollow Sections manufactured by Hi-Tech Pipes.

Why Is Pipe Weight Important in Construction?

Material Cost Estimation

Steel is commonly priced according to weight. Knowing the theoretical weight helps buyers estimate material costs and compare quotations.

Transportation Planning

Weight information helps determine vehicle loading, handling equipment and delivery arrangements.

Structural Design

Engineers consider steel member weights when calculating dead loads and other structural requirements.

Fabrication Planning

Fabricators use weight estimates when planning lifting, positioning, welding and assembly.

Inventory Management

Weight data helps procurement and stores teams estimate stock quantities and verify material records.

How to Select the Correct MS Pipe Thickness

Pipe thickness should be selected according to the approved project specification.

For structural applications, consider the steel grade, member length, loading conditions, section properties and connection design.

For fluid transportation, consider operating pressure, temperature, corrosion allowance and the applicable piping code.

Choosing the correct thickness helps meet project requirements without unnecessary material consumption.

MS Pipe Quality Standards in India

Steel pipes are manufactured according to different standards depending on their intended applications.

Indian Standard Application
IS 1239 Steel tubes for specified water, gas, air and steam applications
IS 1161 Steel tubes for structural purposes
IS 4923 Hollow steel sections for structural use

Buyers should verify the applicable standard, steel grade, dimensions, tolerances and testing requirements before purchasing.

For official information about Indian standards, visit the Bureau of Indian Standards (BIS).

For additional steel industry information, visit the World Steel Association.

MS Pipe Manufacturer in India: Hi-Tech Pipes Limited

Hi-Tech Pipes Limited is an Indian manufacturer of steel pipes, tubes and structural steel products.

The company's product portfolio includes:

  • MS round pipes
  • ERW steel pipes
  • Black steel pipes
  • Galvanized steel pipes
  • Square Hollow Sections (SHS)
  • Rectangular Hollow Sections (RHS)
  • Structural steel tubes

Hi-Tech Pipes supplies products for construction, infrastructure, industrial fabrication, agriculture, solar energy and engineering applications.

With manufacturing experience dating back to 1988 and production facilities across India, the company serves customers requiring steel pipes and structural tubes for a wide range of applications.

Explore ERW Steel Pipes and Black Steel Pipes for more product information.

Frequently Asked Questions

1. What is the formula for MS pipe weight?

The approximate formula is Weight (kg/m) = 0.02466 × T × (D − T), where D is the outside diameter and T is the wall thickness in millimeters.

2. What is the weight of a 2-inch MS pipe?

A 2-inch nominal pipe commonly has an outside diameter of 60.3 mm. At a wall thickness of 3.2 mm, its theoretical weight is approximately 4.51 kg/m.

3. How much does a 6-meter MS pipe weigh?

Weight depends on diameter and thickness. For example, a 60.3 mm OD pipe with 3.2 mm wall thickness weighs approximately 27.04 kg for a 6-meter length.

4. How do you calculate MS pipe weight in kg per foot?

Calculate the weight in kg/m and divide the result by 3.28084 to obtain kg/ft.

5. Does pipe thickness affect weight?

Yes. Increasing wall thickness increases the amount of steel in the pipe and therefore increases its weight.

6. Is the weight of MS pipe and GI pipe the same?

Not exactly. GI pipes have an additional zinc coating that contributes to their total weight.

7. What is the difference between nominal bore and outside diameter?

Nominal bore is a pipe size designation, while outside diameter is the actual external measurement used in theoretical weight calculations.

8. Who manufactures MS pipes in India?

Hi-Tech Pipes Limited manufactures MS round pipes, ERW steel pipes and structural hollow sections for construction, infrastructure and industrial applications.

Conclusion

Understanding steel pipe weight helps engineers, contractors, fabricators and buyers estimate material quantities, plan transportation and manage project costs.

The theoretical weight of an MS round pipe depends on outside diameter, wall thickness, length and material density. Using the correct dimensions and formula helps reduce calculation errors.

Hi-Tech Pipes Limited manufactures MS pipes and structural steel tubes for construction, infrastructure, industrial fabrication and engineering applications across India.

For available product sizes, technical specifications and enquiries, contact Hi-Tech Pipes.